本页产品参数或描述搜索（关键词高亮）：
|
产品描述：
|
MEAD单向阀
Smooth Laminar Flow
The unique construction of Dyla-Trol® assures a perfectly tapering flow. This unprecedented smoothness is made possible by the “iris” type orifice mechanism. Where needle-type flow controls generate turbulence as they close, Dyla-trol® maintains an even 360° laminar flow regardless of the setting.
High Repeatability.
The fast-acting check mechanism in each free flow model responds to very slight changes in pressure. This guarantees fast resetting and dependable repeatability with each cycle.
Precise-Metering Flow Control
Fine tune the speed of your cylinders with precise-metering Dyla-Trol® valves. No other flow control provides such accurate control of cylinder motion.
For best results locate flow control valves right on the cylinder ports with the “free flow” direction pointing toward the cylinder. Air exhausting from the cylinder will then be metered. Controlling air entering the cylinder produces a less smooth motion.
Note: While Dyla-Trol® are most often used to adjust cylinder speed, they are ideal for use wherever air or oil flow is to be controlled.
Compact Inline Design
The convenient inline design makes flow setting and plumbing easy. The hexagonal adjusting sleeve, which may be turned by hand, is only slightly greater in diameter than the tubing and has no protuberances to impair hook-up.
|
|
|
|
|
|
|
|
详细信息：
|
|
Model No.
|
Ports
|
Max Pressure
|
*Flow
|
Body
|
Length
|
|
MF1-02
|
1/4 -28 Male/Female
|
250 Air, 250 Oil
|
8 CFM, Cv = 0.1
|
Brass
|
1 1/4"
|
|
MF1-04
|
Barb for 1/4" Tube
|
250 Air, 250 Oil
|
7 CFM, Cv = 0.1
|
Brass
|
2 1/2"
|
|
MF1-06
|
1/8"NPTF Male/Barb for 1/4" Tube
|
250 Air, 250 Oil
|
7 CFM, Cv = 0.1
|
Brass
|
2 7/16"
|
|
MF1-08
|
10-32 Male/ Barb for 1/4" Tube
|
250 Air, 250 Oil
|
8 CFM, Cv = 0.1
|
Brass
|
2 1/2"
|
|
MF1-12
|
1/8" NPTF
|
250 Air, 1000 Oil
|
47 CFM, Cv = 0.8
|
Aluminum
|
2"
|
|
MF1-25
|
1/4" NPTF
|
250 Air, 1000 Oil
|
66 CFM, Cv = 1.2
|
Aluminum
|
2 1/2"
|
|
MF1-37
|
3/8" NPTF
|
250 Air, 1000 Oil
|
149 CFM, Cv = 2.6
|
Aluminum
|
2 7/8"
|
|
MF1-50
|
1/2" NPTF
|
250 Air, 1000 Oil
|
173 CFM, Cv = 3.1
|
Aluminum
|
3 1/4"
|
*Flow is taken @ 100 PSI
|
|